The Hobbywing XR10 Pro Sensored Brushless ESC/V10 Motor Combo was developed for competition. The XR10 Pro ESC features reliable hardware, combined with intelligent software (containing 10 common select-to-use profiles), and is ideal for 1/10th scale on road and off road applications. The V10 G2 series motors and are compliant with ROAR, IFMAR, BRCA and JMRCA rules and feature the perfect combination of high quality materials, exquisite craftsmanship and cutting edge technology. This combo provides the extra advantage every racer can use, with minimal maintenance required.
Features:
ESC
10 select-to-use profiles including zero-timing/blinky mode, modified mode, stock mode applicable to all 1/10th touring car, pan car and buggy racing.
Internal electronic key switch for
Long service life
High reliability
Neat wiring
Built-in switch mode BEC with a maximum output of 4A and voltage adjustable between 6V and 7.4V for usage with high voltage servos.
Separate PRG/FAN port is able to power an external fan for maximize cooling performance or connect a LCD program box or WiFi module to the ESC.
With the optional WIFI express module from Hobbywing (HWA30503000 - not included) users are able to program parameters, upgrade firmware and check relevant data during the event using either the Iphone or Andriod devices.
Brake and throttle adjustment: 100 levels of brag brake, 50 levels of initial brake force, 9 levels of maximum brake force, 20 levels of brake rate, and 30 levels of throttle rate.
Adjustable brake mode, PWM and brake frequencies and for different competitions and control feel.
Adjustable Turbo Timing & Boost Timing for different applications.
Multiple protections: low-voltage cutoff protection, ESC and motor thermal protection, and fail safe (throttle signal loss protection).
Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real time.
Firmware upgrade via Hobbywing multifunction LCD program box or WiFi Express (item sold separately).
Motor:
Designed to withstand extreme levels of use at its highest peak performance
Complete CNC cut motor case with extra front spoke ventilation slots
Works as a sensored motor and also sensorless without the use sensor cable attached
Multiple steps of mechanical time adjustment from 20 to 50 degrees
Minimal maintenance is required with precise machining technology which ensures a minimum tolerance end play of the rotor shaft. Eliminating the copper shims used in most motors.
200°C high temperature tolerance and high purity copper windings maximize conductivity and reliability
200°C high temperature tolerance sintered NdFeb (Neodymium, 35EH-LT) magnets
Extreme low resistance multi-layered outlet PCB and high RPM NSK bearings