GT.Power사에서 출시한 RPM측정기입니다.
측정기속 3볼트 220mah 배터리 1개 포함되였고 LED소형스크린으로 2엽~9엽까지 회전속도측정가능합니다.
최대 1분에 99999회전까지 측정가능합니다.
파워(Power) 버튼을 3,4초가량 꾹~누르면 측정기켤수있습니다.그리고 Set 버튼1" 이상하여 백라이트켜고
Set 버튼으로 프로펠라/블레이드 수를 선택합니다.
기체회전시 5cm~10cm 거리로 회전하고있는 블레이드에 가까이하면 측정시작합니다.
측정완료후 스크린에 수치나옵니다.
|
-To measure RPM of a spinnning propeller, 2-9 blades ones, memorize peak RPM data.
-Peak RPM value up to 99999 per minute.
-Sharp backlit LCD screen, applicable under poor light condition.
- removable lithium button battery CR2032 （due to shipping restriction, battery is not included).
-Compact&extremely portable.
-Automatically shutoff when signals are not detected within 1 mimute.
-Peak RPM value up to 99999 per minute.
-Sharp backlit LCD screen, applicable under poor light condition.
- removable lithium button battery CR2032 （due to shipping restriction, battery is not included).
-Compact&extremely portable.
-Automatically shutoff when signals are not detected within 1 mimute.
|
Weight:39g
Dimension:90*54*16mm
1. press 'POWER' button for 1 second to power on/off.
2. Press 'SET' button to set the relevant propeller blades.
3. real time RPM value shown when you make the RPM sensor point to the blade within 10cm measurement distance.
4. maximum RPM value are displayed when measurement is finished.
5. backlit LCD are on/off when press 'SET' button for 3 seconds uninterrruptedly.
Dimension:90*54*16mm
1. press 'POWER' button for 1 second to power on/off.
2. Press 'SET' button to set the relevant propeller blades.
3. real time RPM value shown when you make the RPM sensor point to the blade within 10cm measurement distance.
4. maximum RPM value are displayed when measurement is finished.
5. backlit LCD are on/off when press 'SET' button for 3 seconds uninterrruptedly.
|
Inludes:
1 x Tachometer
Requires:
1 x button type battery CR2032 or similar (3V, diameter is about 20mm).
1 x Tachometer
Requires:
1 x button type battery CR2032 or similar (3V, diameter is about 20mm).