1/10 1/12 스케일모든 차량및 1/10,1/8 라클라울링용
1 Specification
| Specification | XERUN-120A-V3.1 |
| Current | Continuous: 120A, Burst: 760A |
| Input * Note #1 | 4-9 cells NiMH/NiCd or 2-3S LiPo |
| Built-in BEC | 6V@3A (linear mode) |
| Resistance | 0.0003 Ohm |
| Motor Supported | Sensored and sensorless brushless motor |
| Suitable Motor | With 2 Lipo or 4-6 NiMH 1/10 on-road: >=3.5T, 1/10 off-road: >=5.5T With 3 Lipo or 7-9 NiMH 1/10 on-road: >=5.5T, 1/10 off-road: >=8.5T |
| Suitable Car | 1/10,1/12 all competitions 1/10,1/8 rock crawler |
| Cooling Fan | 5V |
| Size | 37.5mm(L) * 31mm(W) * 29.5mm(H), excludes wire connectors 37.5mm(L) * 37mm(W) * 29.5mm(H), includes wire connectors |
| Weight | 93g |
| * Note #1 For 4-6 cells NiMH/NiCd or 2S LiPo, the standard cooling fan needn't be changed. For 7-9 cells NiMH/NiCd or 3S LiPo, the standard cooling fan needs to be changed to 12V high voltage fan. | |
2 Features
2.1 All in One. Up to ten profiles can be stored in the memory and imported or exported easily. Factory pre-set profiles include:
Blinky mode, Modify Mode, Stock mode, Practice mode, Offroad mode, Drift mode, Crawler mode.
2.2 Built-in Electronic Switch, long life and high reliability, also saves space on the chassis.
2.3 Aluminum Upper and Bottom Cases with optional colors, giving better heat dissipation, and allowing higher current.
2.4 External Programming Port (EPP), easy to connect and also a power port for additional fan.
2.5 Advanced Dynamic Timing technology, providing more customization possibilities for highest level competitions.
2.6 Precise throttle and brake control, setting of drag brake and brake strength with more options, new punch and brake rate control functions, and throttle and brake curves through the PC client.
2.7 Integrated Data logger, recording the maximum temperature of ESC and motor as well as the maximum RPM, using LCD Programming box to check easily in the pits.
2.8 Multi Protection Functions, making your running safe with ESC and Motor overheat protection, low voltage cutoff and throttle signal loss protection.
2.9 Easily programmed with the Multifunction LCD Program Box and USB Link Software
2.10 New USB LINK Software graphic interface, providing extra parameters for advanced settings.
(Note: The V3.2_121204 or later version USB Link Softwarer is stongly recommended for XERUN V3.1 ESC)
2.11 ESC firmware can be updated through the USB adapter in the LCD Program Box.
1. The Programmable Item List of the ESC.
2. The default settings of 10 pre-set profiles in the ESC.
1. All kinds of competition of 1/10 and 1/12 scale.
2. 1/10 and 1/8 scale crawler pro race.
Typical Settings of XERUN-V3 and V3.1 ESCs
1. Multifunction LCD Program Box (Purchased separately)
2. LCD Professional Program Box (Purchased separately)
(Note: To work with XERUN V3.1 ESC, the LCD Program Box MUST be updated by a new version USB Link Software. Usually, V3.2_121204 or later verison is recommended)
3. New USB Link Software (Works together with the LCD Program Box, and suitable for XERUN V3 ESC)
(Note: The V3.2_121204 or later version USB Link Softwarer is stongly recommended for XERUN V3.1 ESC)